CLM5615 is a 10 bit, single channel, low-power analog-to-digital converter with a stabilization time of 12.5us and power on reset function. Its output is voltage type, and the maximum output voltage is twice the reference voltage value, which resets the DAC register to all zeros. The performance is better than early current type output DACs. Only 3 serial buses are needed to complete the serial input of 10 bits of data, suitable for battery powered testing instruments, digital offset and gain adjustment, and industrial control applications. Directly replacing imported products with PIN without changing the circuit board or software system, achieving complete compatibility and substitution.

10 bit CMOS voltage output DAC

Positive power supply terminal, 4.5-5.5V, usually taken as 5V

3-wire serial data input terminal

High impedance reference input

Voltage output range: 2 times the reference input voltage

Internal power reset

Low power consumption: up to 1.75mW

An update rate of 1.21MHz

Settlement time to reach 0.5LSB: 12.5 µ s typical value

DAC analog voltage output terminal

Battery powered testing instrument

Digital offset and gain adjustment

Battery operation

Remote industrial control

Machines and motion control devices